| Model | TecWood Shutters |
| Blade Sizes | 76 or 89mm |
| Controls | Clearview or Control Bar |
| Colours to choose from | 3 |
| Material | TecWood – Painted ABS blades reinforced with LVL inserts. Engineered wood composites stiles, rails and frames finished with an extruded polypropylene coating. |
| Stiles | Rebate for Joining Panels, Square for single panels |
| Magnet Closure | Yes |
| Single Panel Width | 300mm to 920mm |
| Bi-Fold Panel Width | 300mm to 550mm |
| Max Overall Width (4 panels) | 2200mm |
| Height | 310mm to 2700mm |
| Mid Rail | 76mm (required if Panel Height over 1981mm) |
| Mid Rail Tolerance | Half a blade size |
| Depth Required - 76mm Blade | 52mm for reveal fit (Combination frame). 10mm for face fit (face fit frame). |
| Depth Required - 89mm Blade | 60mm for reveal fit (Combination frame). 25mm for face fit (face fit frame). |
| Manufacturing Tolerance in Width | +/- 2mm |
| Manufacturing Tolerance in Height | +/- 2mm |
| Width Deductions we take (inside mount) | 2mm each side (between shutter frame and window opening) |
| Height Deductions we take (inside mount) | 2mm top and bottom (between shutter frame and window opening) |
Points to note:
All hardware required to install your TecWood plantation shutters is included. When unpacking your shutters please double check for hardware in all boxes before disposing packaging.
Depth Required' is the clearance required from the front to the back of your window frame for uninterrupted operation of the shutter. Please also take into account any window handles or other obstructions that may interfere with the shutter.
The Clearview Tilt system may be split depending on the height of the panel and widths of the blades. The tilt system will be split if the group of blades exceed 19 for 76mm blades and 16 for 89mm blades. Splits will be equal unless there is an uneven number of blades, in which the top section will always have one more blade in the split.
For shutters installed within the reveal of the window frame, please provide the inside window frame sizes. The factory will take the relevant deductions to ensure the shutter fits nicely into your window frame.
For shutters installed on the face of the window frame, please provide the exact measurements you would like the shutter installed (including frames). Deduction will not be taken from your measurement for face fit shutters.