Chain/SmartRelease

Points to note:

Important: 

• Blockout fabrics have a white backing.  When selecting blockout fabrics with "standard roll" the roll of the fabric will always be white.
• The fabric is supplied approx. 28mm less than the width entered due to the brackets and blind mechanism.
• All Roller blinds are subject to telescoping (material rolling off to one side). This can occur when the blind size ration exceeds 3 to 1 height to width or foreign items are caught on the material like insects.
• 'Depth Required' is the clearance required from the front to the back of your window opening for uninterrupted operation of the blind. Please also take into account any window handles or other obstructions that may interfere with the blind.
• For Single blinds to sit neatly inside your window opening, you require a depth of approximately 80mm. You can still install your blind inside the window opening with a minimum depth of 70mm, resulting in the blind protruding from the window opening.
• For blinds installed within the reveal of the window frame, please provide the window size. The factory will take the relevant deductions to ensure the blind fits nicely into your window opening.
• For blinds installed on the face of the window frame, please provide the exact measurements.  Deductions will not be taken for face mount fitting blinds.
• Cord guides will be supplied and must be installed for the prevention of potential chocking hazards.
• Light guards for Light filter fabrics will only provide additional privacy not block out of light.

Day Night Chain/SmartRelease

Points to note:

Important: 

• Blockout fabrics have a white backing.  When selecting blockout fabrics with "standard roll" the roll of the fabric will always be white.
• The fabric is supplied approx. 28mm less than the width entered due installation brackets and blind mechanism
• All Roller blinds are subject to telescoping (material rolling off to one side). This can occur when the blind size ration exceeds 3 to 1 height to width or foreign items are caught on the material like insects.
• Day Night blinds inside window frame - blockout blind will be at back with left hand chain control, front with right hand control.  Day Night blinds will be supplied with a raceway.
• Day Night blinds outside window frame - blockout blind will be at back with left hand chain control, front with right hand control.  Day Night blinds will be supplied with a raceway.
• 'Depth Required' is the clearance required from the front to the back of your window reveal for uninterrupted operation of the blind. Please also take into account any window handles or other obstructions that may interfere with the blind.
• For the blinds to sit neatly inside your window reveal, you will require a depth of up to 96mm. However, you will still be able to install your blind inside the reveal with a minimum depth of 86mm, which will result in the top of the blind slightly protruding from the reveal.
• For blinds installed on the inside of the window frame, please provide the window size. The factory will take the relevant deductions to ensure the blind fits nicely into your window frame.
• For blinds installed on the outside of the window frame, please provide the exact measurements.  Deductions will not be taken for face mount fitting blinds.
• Cord guides will be supplied and must be installed for the prevention of potential chocking hazards.
• Light guards for Light filter fabrics will only provide additional privacy not block out of light.

Cordless

Points to note:Important: 

• The fabric is supplied approx. 28mm less than the width entered due installation brackets and blind mechanism.
• All Roller blinds are subject to telescoping (material rolling off to one side). This can occur when the blind size ration exceeds 3 to 1 height to width or foreign items are caught on the material like insects.
• 'Depth Required' is the clearance required from the front to the back of your window opening for uninterrupted operation of the blind. Please also take into account any window handles or other obstructions that may interfere with the blind.
• For Single blinds to sit neatly inside your window opening, you require a depth of approximately 86mm. You can still install your blind inside the window opening with a minimum depth of 70mm, resulting in the blind protruding from the window opening.
• For Day Night blinds to sit neatly inside your window opening, you require a depth of approximately 96mm. You can still install your blind inside the window opening with a minimum depth of 86mm, resulting in the blind protruding from the window opening.
• For blinds installed on the inside of the window frame, please provide the window size. The factory will take the relevant deductions to ensure the blind fits perfectly into your window opening.
• For blinds installed on the outside of the window frame, please provide the exact measurements.  Deductions will not be taken for face mount fitting blinds.
• The handle must be placed in the centre of the bottom rail to prevent telescoping of the blind material.  If telescoping occurs, slowly lower the blind and lift to realign always using the centred handle. 
• Light guards for Light filter fabrics will only provide additional privacy not block out of light.